Cold Rolled Steel Building Material Tiles Sheet
Specification
Product name |
Cold Sheet |
Standard |
SPCC, SGCC, SGCD, Q195, Q235, Q345 |
Width |
100-2000mm |
Thickness |
0.5-20mm |
Tolerance |
+/-2% |
Product Introduction
Advantages of cold rolled sheet
1.Core advantage features excellent surface quality: High surface finish with no obvious iron oxide scale, it can be directly used for finished product manufacturing without secondary surface treatment.
2.Excellent dimensional accuracy:The thickness tolerance can be controlled within ±0.01mm, and ultra-thin plates ranging from 0.1 to 4.5mm can be produced.
3.Strengthening mechanical properties: The cold work hardening effect increases the yield strength by approximately 30% to 50%, with a typical value of 300 to 550MPa.
4.Extended performance advantage welding performance:The low-carbon steel base material, combined with precise chemical composition control (C content ≤0.15%), ensures the strength of the welded joint.
5.Cold-rolled steel plates have the following advantages Excellent surface quality
Cold rolling is carried out at low temperatures, reducing the formation of oxide scale. It features a high surface finish and good flatness, making it suitable for the manufacturing of precision parts.
Application Cases
Furniture manufacturing
Fishing equipment
Roof grille
Laboratory table
Machinery manufacturing
Shipbuilding industry
Package&Shipment
1.Special scenarios (such as exports) must comply with international transportation standards, for example, marking storage and transportation temperatures and using dedicated temperature control equipment.
2.Packaging requirements Rust prevention treatment:The inner layer should be wrapped with anti-rust paper and sealed with tape, the middle layer should be covered with plastic film to prevent water infiltration, and the outer layer should be wrapped with iron sheet and reinforced with steel tape.
3.Reinforcement measures:The outer packaging should be supported by hard cardboard and corner guards should be added. During transportation, it should be placed on wooden pallets and reinforced with steel straps.
4.Moisture-proof protection:The outer packaging should be made of thick cardboard and reinforced with kraft paper. The interior should be sealed with plastic sheeting and transparent tape to prevent water vapor from corroding the surface.
Package
Shipment