Best Building Material PPGI Sheet Color Coated Steel Roofing Sheet
Specification
Product name |
PPGI STEEL SHEET |
Standard |
SPCC, SGCC, SGCD FULL HARD, DX51D, Q195, Q235 |
Width |
200-1500MM |
Thickness |
0.3-20mm |
Tolerance |
±2% |
Shipping date |
7-10 days in stock,about 30 days for customized |
Place of origin |
Tianjin,China |
Product Introduction
Advantages of pre-coating roofing sheet
1.Lightweight and high strength:The weight of color steel tiles is only 6 to 14 kilograms per square meter, which is equivalent to 1/30 of that of traditional bricks and tiles. They are suitable for large-span buildings and do not require beam and column support.
2.Waterproof and moisture-proof:The surface adopts lap joint and sealing processes, effectively preventing rainwater from penetrating, making it especially suitable for rainy areas.
3.Convenient for construction:The installation does not require complex procedures. Large-scale construction can be completed within one day, and the transportation and handling costs are low.
4.Corrosion and weather resistant:The galvanized steel plate base material combined with multiple layers of anti-corrosion coatings can resist environmental erosion such as acid rain and ultraviolet rays, and has a service life of 10 to 20 years.
5. Cost economy:Compared with traditional building materials, the comprehensive construction cost is reduced by about 30% to 40%, and it can be recycled.
Application Cases
Construction
Warehousing
Wall decoration
Factory plant
Box container
Public facilities
Package&Shipment
1.During transportation, temporary fixation methods such as wooden wedges should be used to prevent loosening and squeezing deformation caused by vehicle body shaking.
2.When transporting over long distances or on poor road conditions, color steel sheets should be placed horizontally. The overhang length at the support points should not exceed 1 meter. Wall panels exceeding 2 meters should be fully bound at the tail.
3.Packaging materials:The packaging of color steel sheets should adopt a frame clamping type, using wood with cross-sections of 50X100 and 100X100 and steel strips of 1X30. The anchor bolts are shipped in wooden cases with 100X100 ribbed wooden blocks at the bottom and beveled at the ends for the use of forklifts during transportation.
4.Bundling method:The connecting plates can be packed in boxes as multiple packaging units of the same specification. Loose parts and other overly long and wide goods can be combined into one packaging unit. Other equipment can be packed in multiple layers in one package, and try to pack goods of similar size together.
Package
Shipment